
ZF43Y, KZF43Y oilfield specific high-pressure flat valve
ZF43Y, KZF43Y, ZF943Y, KZF943, ZF643Y, KZF643Y
FamilyGate valve
Product ID2378
Technical data
High-pressure flat gate valves with a reliable seal and easy operation. Sealing faces are spray welded with hard alloy for corrosion, wear and erosion resistance and can also be used for throttling. Especially suited to opening, closing and regulating flow on water, oil, mud and natural gas lines at working pressure ≤42MPa and working temperature ≤120°C.
- Body available in cast or welded construction.
- Seat sealing faces carry a PTFE insert, giving a double seal of PTFE-to-metal and metal-to-metal. The PTFE face also cleans dirt off the gate.
- O-ring seats and a preloaded floating-seat design seal in both directions, with operating torque only 1/2 that of an ordinary valve.
- Metal-seated valves have a sealant injection structure on the outside of the body. Sealant reaches the sealing faces through the injection valve and seat for emergency sealing and zero leakage.
- On gates with a diversion hole, the gate stays against the seat sealing faces whether fully open or fully closed, protecting them from direct media erosion and extending service life.
- Fully open, a valve with a diversion hole has a smooth straight passage with very low flow resistance and no pressure loss, and can pass a cleaning pig through the line.






Updated 2026-11-03
Product information
Product enquiry
Product confirmation and quotation.
RFQ information
- Product model and required quantity
- Medium, pressure and temperature
- Nominal size, material and connection
- Applicable standard and inspection requirements





