
Z43 & Z44 Flat Gate Valves
Compare the Z43/Z44 dimension drawing and end-connection columns before specifying a valve. Ask ZGV to confirm the exact model suffix, pressure rating and materials for your service.
FamilyGate valve
Product ID2377
Sizes shown in drawingDN 50–300 (NPS 2–12)
End connections shownFlanged (GB/API columns) and butt-weld
Technical data
For DN 100 (NPS 4), the drawing shows 430 mm in the GB flange column and 457 mm in both the API flange and butt-weld columns. Use the line for your connection. The family test-pressure sheet lists nominal and test pressures separately. Confirm the allowable pressure at design temperature for the offered valve.
- The family literature shows cast and welded body designs. Confirm the construction for the exact model suffix.
- The catalogue describes a PTFE seat insert for the applicable seat construction. Confirm the offered seat materials against the medium and design temperature.
- The catalogue describes preloaded floating seats with O-rings. Confirm the required sealing direction and allowable operating force for the offered assembly.
- Metal-seated configurations in the catalogue show an external sealant-injection arrangement for emergency sealing. Specify the required leakage test at quotation.
- The through-conduit drawing shows the gate remaining in contact with the seat faces at both ends of travel.
- For cleaning-pig passage, specify the required clear bore and confirm the through-conduit gate configuration and drawing before ordering.




Updated 2026-11-03
Product information
Product enquiry
Product confirmation and quotation.
RFQ information
- Exact Z43 or Z44 model suffix, nameplate or existing drawing, and quantity
- DN or NPS, end connection and required flange or weld-end dimensions
- Required pressure rating, medium, operating and design temperature
- Body and seat materials, actuation and inspection requirements





